CZ0879 Metal Lighting

SKU: EP063 Categories: , ,

Description

The enclosures of explosion-proof light fittings are die-cast aluminum alloy, with epoxy resin powder sprayed on the surfaces. Therefore, they have good anti-corrosion performance. The transparent part is made by toughened glass of anti-glare edged crystal, and the exposed fasteners are made of stainless steel. Ferrule suspension hook design between the kits of glass cover and the light body is used. Explosion-proof light fitting’s terminal box side entry is suitable for rubber-coated and the armored cable wiring. The unique heat insulation design united exterior high density radiator in the explosion-proof light fitting to cause the radiation effect will be better. It can satisfy the related requirements of illumination in chemical, petrochemical and marine industries.

The explosion-proof light fitting can be selected and matched with different light sources according to the user’s different requirements. The high-frequency generator will be mounted in the light fitting body when the electromagnetic induction energy saving lamp is selected. If the metal halide lamp and high pressure sodium vapor lamp are selected, then the ballast, the trigger and compensation capacitor will be mounted in the body. The energy saving lamp can be fitted in the light fittings directly.

Explosion-proof light fittings can be sorted as: pendant pole type, bracket type, platform type and wall type
The mounting ways of the explosion-proof light fittings are ceiling type, bracket type and chain type
The mounting ways of the explosion-proof platform light fittings C-90° are fence type and platform flange type
The mounting ways of the explosion-proof platform light fittings D-25° are fence type and platform flange type.

  • The degree of protection is up to IP66
  • It is convenient to be mounted and maintained
  • It can be fitted with lamp shade
  • International IECEx Approval, Europe union ATEX Approval

Product Characteristics 

Four directions for wiring and many cable glands

CZ0879/1□ Explosion-proof light fittings

Main Technical Data 

Certification | Ex mark | Meet the standard

China (CQST Ex) Ex nR II C T* Gc DIP A21 TA, T* GB3836   GB12476
IECEx Ex nR II C T* Gc
Ex tb IIIC T* °C Db
IEC60079
ATEX Ex II 3 GD Ex nR II C T* Gc
Ex tb IIIC T* °C Db
EN60079

Intended use: Can be used in zone 2, Can be used in zone 21 and zone 22
Degree of protection: IP66
Rated voltage: 220V AC 50Hz
220V AC, 230V AC, 240V AC 50 Hz, 60Hz
120V/208V/240V/277V/480V AC 60Hz
Ambient temperature: -40°C to +40°C / +55°C
Terminal: L1, N Terminal 2-2.5mm2, PE terminal 2x6mm2
Cable entry: A – Pendant pole type lamp (Standard configuration)
1 x G3/4″, Outside diameter: ϕ8-17mm
– Bracket type lamp (Standard configuration)
Moulded plastic 1 x M25 x 1.5, Outside diameter: ϕ8-17mm
Moulded plastic 1 x M25 x 1.5 stopping plug
– Platform type lamp 90° (Standard configuration)
– Platform type lamp 25° (Standard configuration)
Moulded plastic 1 x M25 x 1.5, Outside diameter: ϕ8-17mm
E – Wall type lamp (Standard configuration)
   Moulded plastic 1 x M25 x 1.5, Outside diameter: ϕ8-17mm
   Moulded plastic 3 x M25 x 1.5 stopping plugs